LED Flood / Tunnel / spot Lights

MARS T SERIES

Easy, Elegant, ECO-Friendly

Patented Hexagonal Honeycomb Heat Dissipation structure.

The advanced nature of a LED lamp is determined by its cooling efficiency.
Good heat dissipation structure will reduce the temperature of the LED chips
and improve the conversion efficiency of light, reduce light decay rate and extend the chips’s service life.

Our patented Hexagonal Honeycomb structure greatly diffuse the heat out of the center of LED chip.

Adopts Up-down through-hole structure which is conductive to the flow of hot and cold air providing superior cooling effect.

Leading Light Distribution Technology

Variety of Patented design LENS.

The Lens for light distribution is with intellectual Property Rights. There transmittance is over 95%, it can increase the light efficiency of the whole lamp. This professional design could satisfy various requirements of global customer. Our TYPE 2,3,4 North American Standard street light lens, zero degree lens, and Specialized Lenses could optimize the lighting effect in variety of occasions.

LENS FOR HIGH-LOW BAY / FLOOD / TUNNEL / SPOT LIGHT

45° Lens

ɸ78x43.5mm, angle of 45° lens is ideal for lamps hanging on the high ceiling in factory, workshop, and retail outlets. It is applicable for street light, flood, tunnel and spot light. When used with our T-series lamps, it can light a 6M-diameter circular region for 7M height.
9M-diameter circular region for 10M height.

60° Lens

ɸ78x40mm, angle of 60° lens  is ideal for lamps hanging on the high ceiling  in factory, workshop, and retail outlets. It is applicable for street light, flood, tunnel and spot light. When used with our T-series lamps, it can light a 9M-diameter circular region for 7M height. 13M-diameter circular region for 10M height.

90° Lens

ɸ77.6x35.4mm, angle of 90° lens  is ideal for lamps hanging on the high ceiling  in factory, workshop, and retail outlets. It is applicable for street light, flood, tunnel and spot light. When used with our T-series lamps, it can light a 12.6M-diameter circular region for 7M height. 18M-diameter circular region for 10M height..

120° Lens

ɸ78x40mm, angle of 60° lens  is ideal for lamps hanging on the high ceiling  in factory, workshop, and retail outlets. It is applicable for street light, flood, tunnel and spot light. When used with our T-series lamps, it can light a 9M-diameter circular region for 7M height. 13M-diameter circular region for 10M height.

MARS T SERIES SPECIFICATION

MODELT1T2T3
Power20W/40W/50W60W/80W/100W/120W150W/180W/210W/240W
Input VoltageAC:90-305V w/Driver ; DC:28-36V
Light sourceBridgelux® or CREE®
Efficacy130 LM/W
Flux(LM)2600/5200/65007800/10400/13000/1560019500/24300/27300/31200
Power Factor0.9
CRI(Ra)>= 70
Color Temp.3000 – 6000K
IP RatingIP65 (Water-proof)
HousingADC 12 die-casting Aluminum
LENSHigh borosilicate 3.3
LENS Dia. ɸ78mm
Beam AngleSelection of angle of light diffusion 45°/60°/90°/120°
Life span>= 50,000 Hrs.
OP Temp.-40° ̴ +70°C
Dimension260x220x98mm420x260x76mm520x290x85mm
Weight2.5Kg 4.0Kg6.8Kg
CertificatesUL / CE / NOM
Install Height4 – 7Meter8 – 10 Meter9 – 12 Meter
WarrantyStandard 5 Years, Extended 10 Years(optional)
REQUEST A QUOTE
Close

Contact Us

Distributors and resellers... ¡Welcome!